DWK Life Sciences Kimble™ Kontes™ TLC Cylindrical Developing Tanks

Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates Kontes TLC Cylindrical Developing Tanks, Chromatog

Fungilab™ Fungicrom-scheidingskamers (TLC)

Fungicrom Separating Chambers (TLC) are to be used with thin layer chropatography. Cuve PR2 Plaques CCM 200X200mm

DWK Life Sciences Kimble™ Kontes™ Lid for Rectangular TLC Developing Tank

Standard Lid for TLC Developing Tank TLC DEV TANK LID

Fisherbrand™ Rectangular TLC Developing Tank

Accommodates a variety of plate sizes KUIP TLC -SHORTY- RECHTHOEKIG

Julabo™ Bath Tanks

Plexiglazen bad, type 7A

Macherey-Nagel™ TLC-kamer voor simultane ontwikkeling

Ontwikkel meerdere TLC-platen tegelijk. TLC-kamers voor simultane ontwikkeling  worden geleverd met een keuze aan ruimte voor 2 of 5 platen. TLC-Separation-Chamber for 5 simultaneous separations, 20 x 20 cm plates

Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover

Resist stress cracking and increase tolerance to many organic chemicals with this polypropylene tank with Cover, an economic alternative to stainless-steel tanks. TANK CYLIND. PP W/COVER 57L

Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover

Significantly reduce evaporation and contamination by using these covered, rectangular tanks, which are offered in sizes from 8 to 114L to meet application needs. Vaten rechthoekig 36x25x25,met deksel 23L

Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks. CYLINDRISCHE TANK PPCO 210L

DWK Life Sciences Kimble™ Kontes™ Chromatography Cylindrical TLC Developing Tanks

Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates. TLC tank Kimble cylindrical glass for 1 x 3inch

Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Copolymer (PPCO) Lowboys with Spigot

Dispense most liquids, including reagents, distilled water and titrants using these polypropylene copolymer (PPCO) lowboys. They fit into tight spaces and can stack three high. Lowboy 8 liter HDPE m/kraan

Thermo Scientific™ Nalgene™ Heavy-Duty Rectangular LLDPE Tank with Covers

Versatility at a lower cost than stainless-steel tanks. HDPE tank 6 gal nalge

Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Cover

Find the right tank to meet your application needs with cylinders ranging in size from 19L to 757L. CYLINDRISCH VAT HDPE 38L

Thermo Scientific™ Nalgene™ Heavy-Duty Cylindrical LLDPE Tanks with Spigots

Nalgene Heavy-Duty Cylindrical LLDPE Tanks include a needle-type spigot installed for draw off. Spigot accepts 5/8 inch I.D. tubing. Tanks are offered in sizes from 19 to 208L.


Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners

Enhance mixing capabilities open-bag, flat-bottom Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners , which offer cost-effective, single-use fluid processing. X10 Tank-Beutel, Coex-PE-Folie, 568 Liter, steril

Kontes™ Replacement Parts for TLC Equilibration Apparatus

For use with Kontes™ rectangular developing tank (K416190-4900) ALUMINIUM HOUDER 6 PLATEN 20X20CM

Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot

An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking. TANK SPIGOT COVER HDPE 17L

Cole-Parmer™ Cylindrical Plastic Tank


Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover

For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. CYLINDRISCHE KUIP LLDPE 114L

DWK Life Sciences Kontes™ rechthoekige TLC ontwikkeltanks met deksel

Molded glass tanks for development of any size TLC plate up to 20 × 20cm Developing Tank with Latch Lid two 20 x 20cm or

Thermo Scientific™ Nalgene™ Closed-Dome Bio Tank Closure with Mixer Support Assembly

Enable overhead mixing in a closed system with this unique flange assembly that can be used with all sizes of Thermo Scientific™ Nalgene™ Closed-Dome Tanks. tank + mixer support assembly Nalgene

Kartell™ HDPE Industrial Tank

Kartell™ HDPE Industrial Tank is useful in everyday laboratory practice and features a comfortable handle with a secure seal-cap following DIN recommendations. X48 industrial tanks HDPE 2 L GL45

Macherey-Nagel™ Developing Chamber

X4 Development chamber 4

Behr Labor Technik™ Dilution Water Tank

Watervat cryostaatb. 30l,VDT30