Cellular Imaging
Cellular Imaging
Invitrogen™ FocalCheck™ Microspheres, 15 µm, fluorescent green ring stain/dark red throughout
Fluorescent green/orange/dark-red ring stains
Invitrogen™ TetraSpeck™ Microspheres, 1.0 µm, fluorescent blue/green/orange/dark red
Beads that each display four well-separated excitation/emission peaks
Invitrogen™ O-Rings for Attofluor™ Cell Chamber
Replacement part for durable and practical coverslip holder for viewing live-cell specimens on upright or inverted microscopes
Invitrogen™ FocalCheck™ Microspheres, 6 µm, fluorescent dark-red ring stain/green throughout
Fluorescent green/orange/dark-red ring stains
Invitrogen™ TetraSpeck™ Microspheres, 0.2 µm, fluorescent blue/green/orange/dark red
Beads that each display four well-separated excitation/emission peaks
Invitrogen™ HybriWell™ Hybridization Sealing System, 40 mm x 21 mm chamber, 0.15 mm deep
Coverslip-seal combination that forms chambers optimized for in situ hybridization work
Invitrogen™ EVOS™ XL Core Configured Cell Imager
The EVOS XL Core Imaging System is a digital transmitted-light inverted imaging system for cell and tissue culture applications and routine cell maintenance.
Invitrogen™ Live Cell Imaging Solution

Physiological medium developed for live cell imaging applications that has broad utility in cell-based research, including dye loading and wash steps
Invitrogen™ TetraSpeck™ Fluorescent Microspheres Sampler Kit
Beads are stained throughout with four different fluorescent dyes
Invitrogen™ EVOS™ XL Core Imaging System
Digital, transmitted light, inverted imaging system for cell and tissue culture applications and routine cell maintenance.
Invitrogen™ ProLong™ Glass Antifade Mountant
ProLong Glass Hard-Set Antifade Mountant is a glycerol-based, hard-setting, ready-to-use mountant that can be applied directly to fluorescently labeled cells or tissue samples on microscope slides.

Thermo Scientific™ Onstage Incubator for CellInsight CX7 HCA Platform
Onstage Incubator for CellInsight CX7 HCA Platform
Invitrogen™ Rainbow Calibration Particles
Rainbow Calibration Particles are used for calibrating flow cytometers.
Invitrogen™ CytoVista™ Tissue Clearing Kit
The CytoVista Tissue Clearing Kit clears fluorescently labeled tissue to enable sharp and bright 3D fluorescent imaging at any tissue depth.
Thermo Scientific™ CellInsight™ CX7 LZR High Content Analysis Platform and Store Standard Edition (SE)
CellInsight CX7 LZR High Content Analysis Platform and Store Standard Edition (SE)
Invitrogen™ CytoVista™ Permeabilization Buffer
CytoVista Permeabilization Buffer is used while performing immunohistochemistry (IHC) or immuno-labeling with tissue.
Invitrogen™ FocalCheck™ Microspheres, 6 µm, fluorescent green/orange/dark-red ring stains
Fluorescent green/orange/dark-red ring stains
Invitrogen™ FocalCheck™ Thin-Ring Fluorescent Microspheres Kit, 1.0 µm, three suspensions
Three suspensions for confocal microscope calibration
Invitrogen™ Secure-Seal™ Hybridization Chamber Gasket, 8 chambers, 9 mm diameter, 0.8 mm deep
Coverslip-seal combination that attaches to microscope slides to form microwells optimized for carrying out in situ hybridization procedures
Invitrogen™ Secure-Seal™ Spacer, 8 wells, 9 mm diameter, 0.12 mm deep
Removable hydrophobic barrier that provides flexibility for isolating specimens
Invitrogen™ HybriSlip™ Hybridization Cover, 60 mm x 22 mm, RNase free
Designed specifically for in situ hybridization
Invitrogen™ HybriSlip™ Hybridization Cover, 22 mm x 22 mm, RNase free
Designed specifically for in situ hybridization
Invitrogen™ FluoCells™ Prepared Slide #1 (BPAE cells with MitoTracker™ Red CMXRos, Alexa Fluor™ 488 Phalloidin, and DAPI)
Contains fixed, multi-labeled, cell preparations for observation by fluorescence microscopy validated for immunofluorescence

Invitrogen™ MultiSpeck™ Multispectral Fluorescence Microscopy Standards Kit (in suspension)
Provides external reference for comparing images collected with different optics, on different instruments and in different laboratories, as well as for monitoring routine day-to-day variations in instrumental performance
Invitrogen™ TetraSpeck™ Microspheres, 4.0 µm, fluorescent blue/green/orange/dark red
Beads that each display four well-separated excitation/emission peaks
Invitrogen™ InSpeck™ Green (505/515) Microscope Image Intensity Calibration Kit, 2.5 µm
Provides microsphere standards that generate series of well-defined fluorescent intensity levels for constructing calibration curves and evaluating sample brightness
Invitrogen™ FluoCells™ Prepared Slide #2 (BPAE cells with Mouse Anti-α-tubulin, BODIPY™ FL Goat Anti-Mouse IgG, Texas Red™-X Phalloidin, and DAPI)
Multilabeled cell preparations for observation by fluorescence microscopy
Invitrogen™ SlowFade™ Gold Antifade Mountant

Liquid mountant applied directly to fluorescently labeled cell or tissue samples on microscope slides
Thermo Scientific™ CellInsight™ CX5 High Content Screening (HCS) Platform
Rapidly perform high content imaging assays with this affordable, compact HCS platform.